logo

SCIENCE CHINA Information Sciences, Volume 64 , Issue 10 : 209205(2021) https://doi.org/10.1007/s11432-019-9949-6

Optimal replacement of degrading components: a control-limit policy

More info
  • ReceivedApr 15, 2019
  • AcceptedMay 30, 2019
  • PublishedJun 29, 2020

Abstract

There is no abstract available for this article.


Acknowledgment

This work was supported by National Natural Science Foundation of China (Grant Nos. 61922089, 61773386, 61673311, 61573366).


Supplement

Appendixes A–E.


References

[1] Zhang Z, Si X, Hu C. Degradation data analysis and remaining useful life estimation: A review on Wiener-process-based methods. Eur J Operational Res, 2018, 271: 775-796 CrossRef Google Scholar

[2] Chen N, Ye Z S, Xiang Y. Condition-based maintenance using the inverse Gaussian degradation model. Eur J Operational Res, 2015, 243: 190-199 CrossRef Google Scholar

[3] Liu B, Wu S, Xie M. A condition-based maintenance policy for degrading systems with age- and state-dependent operating cost. Eur J Operational Res, 2017, 263: 879-887 CrossRef Google Scholar

[4] Elwany A H, Gebraeel N Z, Maillart L M. Structured Replacement Policies for Components with Complex Degradation Processes and Dedicated Sensors. Operations Res, 2011, 59: 684-695 CrossRef Google Scholar

[5] Si X, Li T, Zhang Q. An Optimal Condition-Based Replacement Method for Systems With Observed Degradation Signals. IEEE Trans Rel, 2018, 67: 1281-1293 CrossRef Google Scholar

[6] Sun Q, Ye Z S, Chen N. Optimal Inspection and Replacement Policies for Multi-Unit Systems Subject to Degradation. IEEE Trans Rel, 2018, 67: 401-413 CrossRef Google Scholar